Copper Zinc Alloys Brazing Filler Metals

This topic contains 0 replies, has 1 voice, and was last updated by  routerfixture 3 weeks, 3 days ago.

  • Author
    Posts
  • #29706
     routerfixture 
    Participant

    Silicon brass brazing alloy
    StandardOwn StandardCuZnRestMelting Temperature RangeApplied Base Metal
    Cu470a(ISO)BCu60Zn(Si)
    58.5~61.5balanceSi:0.2~0.4875~895Copper, Bronze and Steel
    Cu670(ISO)BCu60Zn(Si)(Mn)58.5~61.5balanceSn:?0.2
    Si:0.15~0.40
    Mn:0.05~0.25875~900Copper, Bronze and Steel
    Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing. The fluxes are recommended to be used. The surface of joint is bright and clean.
    Preform Dimension
    Form Wire Dia LengthID (inner diameter) Width Thickness
    Rod 0.5—5.03—1000
    Ring 0.5—3.0
    5—120
    Wire0.5—2.0
    Foil
    1.5–1200.15–2
    Strip
    1.5–1200.15–2
    If you require special dimension, please call or email directly.Copper Zinc Alloys Brazing Filler Metals
    website:http://www.chinabraze-ens.com/brazing-alloy/copper-zinc-alloys-brazing-filler-metals/

You must be logged in to reply to this topic.

©2019 The LUST Experience | Brought to you by the makers of The TENSION Experience |  Privacy Policy.

Log in with your credentials

or    

Forgot your details?

Create Account

Skip to toolbar